Pausing The Cooking Process Stop&Go (Pause); Memory Function; Automatic Switch Off - Hisense I6433C7 Instructions Manual

• When the desired value is set, the countdown begins. The point (L1) indicating which cooking
zone the timer function is set for will continue to flash.
• After the set time has expired, acoustic signal will be activated and the cooking zone will be
switched off. "00" will flash on the clock display.
• Switch off the alarm by touching any key; alternatively, it will switch off automatically after a certain
period of time.
Changing the set cooking time
Remaining cooking time can be changed at any time during cooking. Touch the power-off timer key
(K) to select the timer display for the desired cooking zone. The relevant indicator light (L1) will flash.
Touch the (L) or (M) key to set a new desired cooking time.
Displaying the remaining cooking time
If several timer settings are activated, remaining cooking time can be displayed by touching the (K)
key.
Timer reset
Select the desired timer display by pressing the (K) key (see section Changing the set cooking time).
The set timer will be displayed and the indicator light for the relevant cooking zone will light up. Touch
the (M) key to set the value to "00", or press the (L) and (M) keys simultaneously to immediately reset
the value to "00".
Pausing the cooking process
The Stop&Go function can be used to pause the operation of the entire cooking hob for up to 10
minutes. All cooking zones will temporarily switch off automatically. This is convenient when, for
example, the contents of one of the pans has boiled over and you wish to clean the cooking hob.
Activating the Stop&Go function
At least one cooking zone must be active. Touch the Stop&Go function key (F). A short beep will be
emitted. All settings on display units start to flash; the pause key will be lit and it will also flash. All
program timer or minute minder settings are paused. All keys are inactive, except for the pause
(stop/go) key and the on/off key. If you do not press any key within 10 minutes, all active cooking
zones will switch off automatically.
Deactivating the Stop&Go function
Press the pause key again within 10 minutes. The cooking hob continues to operate with the same
settings as before the pause.

Memory function

This function allows you to retrieve all cooking zone settings if the cooking hob was accidentally
switched off. However, this can only be done within five seconds after the hob has been switched off.
Use the on/off key to switch the cooking hob back on within 5 seconds after it has been switched off.
The key (F) will flash on the display unit for 5 seconds. Within that time, touch this key and all settings
that were active just before the hob was switched off will be restored.

Automatic switch off

If the keys are activated for too long during cooking (e.g., due to spilt liquid or an object placed over
the sensor keys), all cooking zones will be switched off after 10 seconds. The symbol
the display.
Stop&Go (pause)
will flash on
19