Hisense I6421CB Instructions Manual page 42

FITTING THE FOAM GASKET
Some appliances come with the gasket already fitted!
Before installing the appliance into a kitchen worktop, attach the foam gasket supplied
with the appliance to the bottom side of the glass ceramic hob.
- Remove the protective film from the gasket.
- Attach the gasket to the bottom side of the glass (2–3 mm away from the edge). The
gasket has to be applied along the entire edge of the glass. The gasket may not overlap
in the corners.
- When fitting the gasket, make sure it is not damaged by or in contact with any sharp
objects.
- The worktop has to be completely level.
- Protect the cut out surfaces.
42
Do not install the appliance without this gasket!