Table of Contents
Advertisement
6.2 Powering on the induction cooking hob
1. Touch
to power on the induction hob.
2. Place the cookware onto the selected cooking zone.
3.
appears on all cooking zone displays; a short beep is emitted.
INFORMATION!
If no cooking zone is switched on in 10 seconds, the induction hob will power off.
6.3 Switching on the cooking zones
1. Touch the
key for the selected cooking zone. The selected display unit will flash.
2. Use the
or
key to set the power level for the selected cooking zone.
3. The cooking zone remains activated.
4. If the hob does not recognize any pan on the selected cooking zone, the symbol
you do not place a pan on the selected cooking zone within 2 minutes, the cooking zone will auto-
matically switch off.
INFORMATION!
During operation, power level for the selected cooking zone can he adjusted using
the
or
key.
6.4 Bridged cooking zone
(depending on the model)
•
Some models allow combining two cooking zones on the left-hand side into a single large
connected cooking zone. Thus, a large oval pan or a griddle can be placed on the combined
cooking field. The pan has to be large enough to cover the centres of the upper and lower cooking
zone.
•
Maximum pan size: 40 x 25 cm. For even heat distribution, we recommend using a heavy-bottom
baking dish or pan. During cooking, the dish or pan will heat up. Be careful to prevent burns.
•
When placing the baking dish on the hob, make sure it does not cover the control module.
appears. If
19
Advertisement
Table of Contents
