LifeGear 97114 Owner's Manual page 23

E10 error code: This usually indicates the overload protection. Possible cause for
overload protection is that the overload of the input current of motor that triggered the
power control board protection. Lubricate your treadmill with some lubricant. There is an
issue with the motor or the power control board. Please contact your local Customer
Service.
etween the
E12 error code: This usually indicates the communication problem b
computer console and the power control board. V
erify the wires connected to the
power control board and computer console are loose or disconnected. Find the wires that
goes between the power control board and the computer console. Unplug any connections
and replug. If the error code is still shown, please contact your local Customer Service.
22