LifeGear 97114 Owner's Manual page 12

29
Step 4
Adjust the angle of the Computer Console Panel (29) to a certain position.
Place the Safety Tether Key (38) onto the Upper Computer Console (23).
Plug the indicated end of the Power Cord (45) into the Power Socket (48) on the treadmill.
Step 5
The running belt has been adjusted to the running deck at the factory before it was
shipped. At times the running belt may get slippery during shipment. After the treadmill is
completely assembled, use the 6 mm Allen Wrench to turn the both left and right rear roller
adjustment bolts 1/4 turn clockwise before using the treadmill.
23
38
29
45
45
48
11
(38) Safety Tether Key
1 PC
(45) Power Cord
1 PC
Tool:
Allen Wrench 6 mm