Table of Contents
Advertisement
VIKING ACCESSORIES
VIKING MONITOR
With the Viking Monitor App, this tool allows you to monitor and label
multiple operators by site and location for quick reference. Provides error
notifications, operator status, settings and diagnostic information.
Part# VA-MONITOR
***Q -7 & ECU Operators require ( 1) Antenna Extension Cable (part# VA- RPSMA)***
VIKING AC SURGE PRO
the high voltage power supply of your gate operator. Connecting the AC
Surge Pro in parallel to the EMI Board, provides a dual layer of protection
from surges up to 20,000 Volts / 10,000 Amps. Part# VA-SURGEPROAC
VIKING 24V SOLAR KIT
package are intended to provide sufficient power for general applications.
Part# VA-SOCHP
This Kit includes the following components:
(2)
12V 40W Solar Panels
(2)
12V 35Ah batteries
(1)
Solar Charger
(1)
Solar Power Harness
VIKING SOLAR BRACKET SET
18Ah batteries and Viking 24V Solar Charger (or Viking Loop Rack) to the
ECU Enclosure. Part# VA-ECUBB12
This Kit includes the following components:
(2)
Brackets for 18Ah batteries
(1)
Solar Accessory Plate
! NOTE:
the following and may require increased panel and battery capacities:
• Power consumption of all accessories being used
• Average solar radiation of geographic location
4 4
Off-site access to operator diagnostics.
The number of cycles achieved from this kit are dependent upon
Adds another layer of protection to
The components included in this
Part# VA-SO40W
(wired in series = 24V 80W)
Part# DUBA35
(wired in series = 24V 35Ah)
Part# SOCHR10
Part# SOHAR
Conveniently secures two
VIKING TECHNICAL SUPPORT 1.800.908.0884
Advertisement
Table of Contents
