GATE OPERATOR INSTALLATION
Rear Mounting Bracket
The following configurations are just samples that indicate the flexibility of this bracket.
•
The gate hinge location will determine the configuration you will choose to achieve
the A and B dimensions on pages 12-13.
•
When possible, it is best to use all 3 Bolts provided to secure the Extension Bracket
to the Wall Bracket and torque specifications provided.
TECHNICAL TIP:
Multiple configurations can be used to achieve the same A and B dimensions.
Pull to Open Left
Open
110° Open Left
1 4
Pull to Open Right
Open
110° Open Right
Push to Open Left
Torque Specifications:
Install Rear
Mounting Bushing
Push to Open Right
Open
Open
Check that the Chassis
does NOT contact the
Mounting Bracket when
Gate is closed
VIKING TECHNICAL SUPPORT 1.800.908.0884
33 ft-lb
80 ft-lb