BTS3900A(Ver.B)
Installation Guide
12.7 Installing the CPRI Cable (Optional)
The CPRI cable between RF module and the BBU is used to transmit the CPRI signals between
the RF module and the BBU.
12.8 (Optional) Installing Inter-BBU Signal Cable
Install inter-BBU signal cable with a DLC connector at both ends for interconnecting optical
ports onsite when a triple-mode base station is configured as GU (BBU0)+L(G) (BBU1) or GL
(BBU0)+U(G) (BBU1).
12.9 Installing the Batteries and Related Cables
This section describes the procedure and precautions for installing the batteries and related
cables.
Issue 01 (2011-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 Installing the Cables
81