Huawei BTS3900A Installation Manual page 149

BTS3900A(Ver.B)
Installation Guide
Context
The RF jumpers must be connected securely to prevent RF signal leakage.
Procedure
Step 1 Remove the screws from the cable hole at the bottom, and then remove the cable outlet module.
Step 2 Lead the RF jumper into the cabinet from the cable hole along a cable route shown in
12-59, and then route the jumper by referring to
Figure 12-59 Route of the RF jumper
Step 3 Install the RF jumper, as shown in
Figure 12-60 Installing the RF jumpers on the interconnected RFUs
Issue 01 (2011-10-25)
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12.1 Cabling
Figure 12-61 and Figure
12 Installing the Cables
Requirements.
12-60.
Figure
140