Huawei BTS3900A Installation Manual page 153

BTS3900A(Ver.B)
Installation Guide
Step 3 Route the other end of the CPRI cable out of the cabinet along the RF cable through the cable
hole on the left of the power cabinet, and then route the CPRI cable into the RF cabinet. Then,
route the CPRI cable to the corresponding RFU, as shown in
Figure 12-64 Installation of the CPRI cable
Step 4 Insert the SFP connector at the other end of the CPRI cable into the CPRI0 port on the RFU
panel, as shown in
Step 5 Route the cables by referring to
cables.
Issue 01 (2011-10-25)
NOTE
As shown in Figure 1, the lines in yellow are cables already installed before delivery, and the lines in blue
and green are cables that need to be installed on site.
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12-64.
12.1 Cabling Requirements
12 Installing the Cables
Figure 12-64.
and use cable ties to bind the
144