Huawei BTS3900A Installation Manual page 151

BTS3900A(Ver.B)
Installation Guide
Step 4 Seal the cable holes for RF jumpers, as shown in
1.
2.
3.
Issue 01 (2011-10-25)
Figure 12-62 Fixing the DIN connector
Lead RF jumpers through corresponding cable holes, and then install the cable outlet
module on the bottom of the cabinet.
Use rubber caps to seal the idle cable holes in the cable outlet module.
Insert the metal piece, and then tighten the screw.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 Installing the Cables
Figure 12-63.
142