Huawei BTS3900A Installation Manual page 100

Hide thumbs Also See for BTS3900A:

Table of Contents

BTS3900A(Ver.B)

Installation Guide

Figure 12-9 Installing the APM30H's 110 V AC dual-live-wire power cable on the EPS

(1) L1 wire

Step 3 Route the cable by referring to

cable.

Step 4 Run each cable that leaves the cabinet in the PVC corrugated pipe, and then tie the pipe to the

cable hole in the cabinet.

Step 5 Label the installed cables by referring to Attaching a Sign Plate Label.

----End

Installing the Power Cable Between the APM30H and the TMC11H

The power cables between the APM30H and the TMC11H are the input power cable for the

TMC11H and power cable for the junction box in the TMC11H. The power cables are used to

feed power to the TMC11H and other equipment from the APM30H. The power cables between

the APM30H and the TMC11H are optional, which are delivered and used with the TMC11H.

Issue 01 (2011-10-25)

(2) L2 wire

12.1 Cabling

Huawei Proprietary and Confidential

(3) N wire

Requirements, and then use cable ties to bind the

12 Installing the Cables

(4) PE wire

Table of Contents

Bts3900a wcdmaBts3900a lteBts3900a gsm