Table of Contents
Advertisement
Installing/Removing Mixing Elements
1. Slide the selected mixing element onto the holder chuck and rotate clockwise
until it locks in.
WARNING!
Make sure that the mixing element is firmly seated in the holder chuck.
2. To remove the mixing element, press it slightly towards the holder chuck, rotate
counter-clockwise, and then pull it down.
Filling with Ingredients
1. After installation of the selected mixing element, fill the mixing bowl with
ingredients to knead. Do not exceed the maximum filling level:
Recommendation: 0,5 kg of flour per 0,250 litre of liquid.
We recommend to pour water (or other liquid) in the mixing bowl first, and then add
flour.
The appliance might be able to knead larger amounts, but it could lead to premature
EN
wear and possible damage. The appliance overloading also extends the
mixing/kneading time and causes unsatisfactory results.
Starting the Appliance
1. When the mixing bowl is filled with ingredients, lower the motor block.
2. Rotate the opening/closing lever downwards (observe the marking at the left
side of the appliance).
This provides for the appliance's readiness for operation with the safety switch.
3. Plug the appliance into a suitable single socket.
4. To switch the appliance off, rotate the speed controller from '0' setting to '1'
setting.
14 / 18
Installation and operation
101915
Advertisement
Table of Contents
