Replacing The Lower Data Cable - Precor Precision 400 Series Service Manual

Replacing the Lower Data Cable

1. Switch the power OFF and unplug the power cord.
2. Remove the front top shroud display bracket cover, see
ment" on page 75.
3. Remove these rear drive covers: the drive cover access panel, top, left, and right
drive covers (see
4. Remove the console and disconnect the Data , Ground, and Heart Rate cables, see
"Console Replacement" on
5. Remove the left outrigger side tube and disconnect the upper to lower data cable con-
nection, see "Outrigger Side Tube Replacement" on
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Covers and Panels Replacement" on
page 93.
6 Available Replacement Procedures
Data Cable Replacement
"Covers and Panels Replace-
page 75).
page 179.
Page 105