Covers and Panels Replacement
This procedure provides instructions to remove/install the EFX400 covers and panels.
Cover
Top shroud display bracket Cover
Water Bottle Assy Covers
Lift Covers
Magazine Rack Lift Cover
Front Lift Cover
Rear Drive Covers
Drive cover access panel
Drive top cover
Drive side covers
Wedge cover
Drive front cover
Drive bottom cover
Water Bottle Assy covers
This procedure replaces the top shroud display bracket cover and water bottle assembly
covers.
Removal
1. Switch the power "OFF", and
Top shroud display bracket cover
2. Remove the 2 mounting screws and the Top Shroud Display Bracket cover.
1
Disconnect a device power cord plug or cable connector from the power receptacle or out-
let.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Remove/lnstall Procedure
Top shroud display bracket Cover
Water Bottle Assy covers
"Lift covers" on page 77
"Lift covers" on page 77
"Lift covers" on page 77
"Rear Drive covers" on page 81
"Rear Drive covers" on page 81
"Rear Drive covers" on page 81
"Rear Drive covers" on page 81
"Rear Drive covers" on page 81
"Rear Drive covers" on page 81
"Rear Drive covers" on page 81
1
unplug
the power cord.
6 Available Replacement Procedures
Covers and Panels Replacement
Page 75