Integra Codman VPV System Manual page 16

EN – ENGLISH
Table 3 – Guidance and Manufacturer's Declaration – Immunity
ME Equipment and ME Systems that are NOT Life-supporting
Guidance and Manufacturer's Declaration – Immunity
The VPV Programmer is intended for use in the electromagnetic environment specified below. The customer or user of
the VPV Programmer should ensure that it is used in such an environment.
Immunity Test IEC 60601
Test Level
Conducted RF 3 Vrms
IEC 61000-4-6 150 kHz to 80 MHz
Radiated RF
3 V/m
IEC 61000-4-3 80 MHz to 2.5 GHz
For RF Immunity Wireless Communication Equipment refer to test method per Table 9 of IEC60601-1-2 4th ed.
Compliance Electromagnetic
Level Environment – Guidance
(V1)=3Vrms Portable and mobile communications
equipment should be separated from the VPV
(E1)=3V/m
Programmer by no less than the distances
calculated/listed below:
D=(3.5/V1)(√ P) 150kHz to 80MHz
D=(3.5/E1)(√ P) 80 to 800 MHz
D=(7/E1)(√ P) 800 MHz to 2.5 GHz
where P is the max power in watts and D is
the recommended separation distance in
meters.
Field strengths from fixed transmitters, as
determined by an electromagnetic site survey,
should be less than the compliance levels
(V1 and E1).
Interference may occur in the vicinity of
equipment containing a transmitter.
Table 4 – Recommended Separation Distances between portable and mobile RF Communications
equipment and the VPV Programmer
ME Equipment and ME Systems that are NOT Life-supporting
Recommended Separations Distances for the VPV Programmer
The VPV Programmer is intended for use in the electromagnetic environment in which radiated disturbances are
controlled. The customer or user of the VPV Programmer can help prevent electromagnetic interference by maintaining
a minimum distance between portable and mobile RF Communications Equipment and the VPV Programmer as
recommended below, according to the maximum output power of the communications equipment.
Max Output Power Separation (m)
(Watts) 150kHz to 80MHz
D=(3.5/V1)(√ P)
0.01 0.116667
0.1 0.368932
1 1.166667
10 3.689324
100 11.66667
12
Separation (m) Separation (m)
80 to 800MHz 800MHz to 2.5GHz
D=(3.5/E1)(√ P) D=(7/E1)(√ P)
0.116667 0.233333
0.368932 0.737865
1.166667 2.333333
3.689324 7.378648
11.66667 23.33333