Vertiv™ Liebert® EXM2 UPS User Manual
5.3.3 Operator Controls
The Operator login confers control of UPS functions:
•
Silence (Alarm)
•
Inverter On
•
Inverter Off
•
Reset Fault
•
Energy Saving Mode Activation
•
Battery Operations
Each command is available under the OPERATE menu. The OPERATE menu may be used by logging in with Operator,
Administrator and Service access.
N O TE: Risk of im proper operation. C an cause load drop resulting in equipm ent dam age. The Inverter
O n, Inverter O ff, Reset Fault and Energy Saving M ode A ctivation com m ands w ill be available
w henever the U PS is operating. Before executing any com m and, verify that the U PS status is suitable
for the com m and to be perform ed.
O perate M enu C om m ands
All Operator commands are available from the OPERATE menu. The menu is available whenever the UPS has input power.
The UPS need not be supplying power to the load for the menu to be available. The animated mimic is not linked to data in
this view—touching a component will not cause it to display data.
Figure 5.16 O PERA TE m enu— O perator login
74
5 Operator Control and Display Panel