Operator Controls - Vertiv Liebert APM Plus 0500kMK16FN02000 User Manual

5.3.3 Operator Controls

The Operator login confers control of UPS functions:
• Silence (Alarm)
• Inverter On
• Inverter Off
• Reset Fault
• Energy Saving Mode Activation
• Battery Operations
Each command is available under the OPERATE menu. The OPERATE menu may be used by logging in with Operator,
Administrator, and Service access.
NOTE: Risk of improper operation can cause load drop resulting in equipment damage. The Inverter On, Inverter Off,
Reset Fault, and Energy Saving Mode Activation commands will be available whenever the UPS is operating. Before
executing any command, verify that the UPS status is suitable for the command to be performed.
Operate Menu Commands
All Operator commands are available from the OPERATE menu. The menu is available whenever the UPS has input power.
The UPS need not be supplying power to the load for the menu to be available. The animated mimic is not linked to data in
this view—touching a component will not cause it to display data.
Figure 5.16 OPERATE menu—Operator login
5 Operator Control and Display
Panel
Proprietary and Confidential ©2023 Vertiv Group Corp.
Vertiv™ Liebert® APM Plus User Manual
75