Care And Maintenance; Changing The Filter; Cleaning The Air Quality Sensor; Cleaning The Case - ElectrIQ EAP500-WIFI User Manual

CARE AND MAINTENANCE

• Always shut off the unit and unplug from the mains before cleaning or performing
any maintenance.
• When the unit is not in use for long periods, it is advisable to remove the plug from
the power socket.
• Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may
cause irreversible damage to the unit.
• Do not assemble the unit and power it on before all the parts are completely dry.
Any other maintenance than what is described in this user manual must be only
performed by the service centre.

CHANGING THE FILTER

Open the filter covers by pressing in the retaining tabs and pulling the side covers
free. Remove the old filters by simply pulling on the tabs to release them. Replace
the filters with a new/clean ones before replacing the filter covers. Press the reset
button to reset the filter timer once it has been replaced.

CLEANING THE CASE

• Only use tepid water and a mild detergent on a soft cloth.
• Do not use bleach or abrasives.
• Do not splash water directly onto the main unit.
• Avoid wetting the power connection port, doing so may cause an electric shock
and can lead to the insulation deteriorating or unit to rust.

CLEANING THE FILTERS AND FILTER HOLDING AREA

• Hoover the filter gently every 2-3 weeks or more often if used in dusty
environments.
• Ensure the filter is not damaged during the cleaning process and replace if it
shows signs of damage.
• Wipe the filter holding area with a dry cloth if necessary.

CLEANING THE FILTER COVER AND CLEAN AIR OUTLET

• Use water and a mild detergent.
• Do not use bleach or abrasives.
• Do not spray water inside the unit.
• If the clean air outlet grilles get soiled easily, use a vacuum attachment or soft
brush to clean.
• If the filter cover is dirty, hoover it. If it is heavily soiled, wash it with warm soapy
water and dry thoroughly before reinserting it in the unit.
22