Care And Maintenance - ElectrIQ EAPDC150HCST User Manual

CARE AND MAINTENANCE

Always turn off the unit and unplug from the mains before cleaning or performing any maintenance. If
the unit is not to be used for a prolonged period it is advisable to unplug it from the mains. Do not use
chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage to the
unit.
CLEAN THE EXTERNAL CASE
Only use tepid water and a mild detergent on a soft cloth. Do not use bleach or abrasives. Do not splash
water directly onto the appliance. Avoid wetting the DC power port. Doing so may cause an electrical
shock and can lead to deterioration of the electrical insulation, or cause the unit to rust.
CLEAN THE FILTER AND THE FILTER HOLDING AREA
Vacuum the filter gently every 2-3 weeks or more often if used in a dustier environment. Please make
sure the filter is not damaged during the process and replace if necessary. Wipe the filter holding area
with a dry cloth.
Replacement filter cartridges can be purchased using the code: FIL-EAPDC150HCST.
CLEAN THE FILTER COVER AND CLEAN AIR OUTLET
Use water and a mild detergent. Do not use bleach or abrasives. Do not spray water onto or inside the
unit. If the clean air outlet grilles are dirty, use a vacuum attachment or soft brush to clean.
Clean the filter cover with a vacuum cleaner, if it is heavily soiled remove it from the unit and wash with
warm soapy water. It must be dried thoroughly before reinserting it in the unit.
NOTE: Do not assemble the unit before all the parts are completely dry. Any maintenance not described
in this user manual must be performed by the service centre.
7