Table of Contents
Advertisement
CONNECTION TROUBLESHOOTING
1. Check whether the device is powered on and is in the correct wifi connection
mode, if not please refer to the CHANGING BETWEEN CONNECTION MODES
section.
2. Ensure the wifi password has been entered into the app correctly (Case sensitive)
3. Check that the phone is connected to the wifi you are connecting the device to.
4. Ensure the network you are connecting it to is 2.4Ghz (5Ghz wifi networks are not
supported), and that there is a strong wifi signal to the item.
5. If your router is dual band, ensure that the 2.4ghz network has a different network
name (SSID). Further advice on changing router settings will be available from
your Internet service provider / Router manufacturer.
6. Check the settings on the router. Encryption should be WPA2-PSK and
authorisation type should be set to AES
7. Try using the alternative connection method. i.e. If connection is failing when
attempting to connect through CF mode, try AP mode.
PROFILE TAB
The profile tab gives you the option to edit both your
detail, and use the added features of the unit.
CHANGING THE NAME OF YOUR DEVICE
When in any of the device screens further settings for
the device can be accessed, by pressing on the three
dots in the top right hand corner. The top option
within this allows you to change the name of the
device to something relevant to the use of the
product, such as "Living Room Air Purifier". Within
the menu, you also have the option of setting up a
pattern lock or change your password.
DEVICE SHARING
This allows you to share access to the controls of
your air purifier with friends and family.
INTEGRATION
This allows the unit to be integrated with your
favourite home automation hardware such as Google
Home and the Amazon Echo.
21
Advertisement
Table of Contents
