Operation Instructions; Before First Use - ElectrIQ EAP500-WIFI User Manual

OPERATION INSTRUCTIONS

USING THE TOUCH CONTROLS
The controls respond to touch, so you
•
don't need to apply any pressure.
Use the ball of your finger, not its tip.
•
Make sure the controls are always
•
clean, dry, and that there is no objects
covering them.

BEFORE FIRST USE:

7) Connect the plug to an earthed socket
1) Unpack the appliance and remove the
filter cover from the side of the unit by
unclipping at the base of the cover.
2) Remove the filters from the plastic
protective packaging
3) Install the activated Carbon and Photo Catalyst filter into
the side of the unit.
4) Install the HEPA filter into the side of
the unit.
5) Replace the filter cover on the side of
the appliance, ensuring it clicks into place.
6) Repeat to install the filters in the opposite side of the
appliance.
8