ElectrIQ EAP500-WIFI User Manual page 19

SMART SCENES
Smart Scenes is a powerful tool providing the option to customise the operation of the air
purifier based both on conditions within the room and outside influences. This gives the user
the option of specifying much more intelligent actions. These are split into two catagories
Scene and Automation.
SCENE
Scene allows for a one touch button to be added to the Home screen. The button can be
used to change a number of settings in one go, and can change all the settings within the
unit. A number of scenes can easily be setup, allowing the user to easily change between a
number of preset configurations.
Below is an example of how to set up a scene:
1. Press on the Smart Scene
tab at the bottom of the
Home screen
6.
Once all the functions required have been added, press the Save button in the top right corner to
finalise and save your new Scene
2. Press on the Plus in the top
right corner to add a smart
scene.
4. Press the Pen next to
"Please Enter Scene Name" to
input the name for your Scene
Show on Dashboard: Leave
this on if you require the scene
to be displayed as a button on
the Home Screen
Press the Red Plus to add the
action required. Then select
the air purifier from the list of
devices.
19
3. Select Scene to create a
new Scene
5. Chose the function, set the
value for the function, and
then press the back button in
the top right corner, to return
to the previous screen.