Table of Contents
Related Manuals for ElectrIQ EAP500HC
Summary of Contents for ElectrIQ EAP500HC
- Page 1 USER MANUAL EAP500HC Thank you for choosing electriQ Please read this user manual before using this innovative Air Purifier and keep it safe for future reference. Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals...
-
Page 2: Table Of Contents
CONTENTS SAFETY INSTRUCTIONS AIR PURIFIER DIAGRAM ABOUT YOUR AIR PURIFIER INFORMATION ON INDOOR POLLUTANTS OPERATION INSTRUCTIONS BEFORE FIRST USE HOW TO USE EXTRA FEATURES CARE AND MAINTENANCE CHANGING THE FILTER CLEANING THE AIR QUALITY SENSOR CLEANING THE CASE CLEANING THE FILTERS AND FILTER HOLDING AREA CLEANING THE FILTER COVER AND CLEAN AIR OUTLET TECHNICAL SPECIFICATION TROUBLESHOOTING... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Important! Carefully read the instructions before operating the unit. This appliance is for indoor use only. This unit must only be connected to a 220-240V / 50Hz earthed outlet. Installation must be in accordance with regulations of the country where the unit is used. -
Page 4: Air Purifier Diagram
The use of accessory attachments that have not been approved by the appliance manufacturer is not recommended, as this may result in fire, cause an electric shock and/or cause personal injury. Ensure hands are fully dried before plugging or unplugging the appliance. ... -
Page 5: About Your Air Purifier
Photocatalytic filter further decomposes pollutants. Plasma Ioniser sterilises the air further and removes mould spores and allergens from the air The EAP500HC also features an air quality LED indicator that will provide a visual indication of the current air quality. Applications: ... -
Page 6: Information On Indoor Pollutants
Plasma Ionisers will sterilise the air and reduce bacterial growth. The antibacterial activated carbon on the EAP500HC is a natural material biosynthesized from walnut shell, the absorption area of activated carbon is very large at up to 300,000 square meters. -
Page 7: Operation Instructions
OPERATION INSTRUCTIONS BEFORE FIRST USE: 1) Unpack the appliance and remove the filter cover from the front of the unit 2) Remove the filter from the plastic protective packaging 3) Load the composite filter into the front of the unit and replace the cover. -
Page 8: How To Use
HOW TO USE: DISPLAY Shows Air Quality (PM index) Speed / Timer when appropriate button pressed Press to turn the appliance on and off. POWER With the unit turned on, repeatedly press the timer button to select in how many hours it should turn off. The duration can be set between TIMER 1 and 12 hours in 1 hour increments. -
Page 9: Extra Features
EXTRA FEATURES: TURN OFF THE Press and hold the Power and Speed buttons for 5 seconds FRONT COLOUR to turn the colour indicator on and off. INDICATOR Press and hold the Power and Auto buttons for 5 seconds to IONISER turn the ioniser on and off. -
Page 10: Cleaning The Case
CLEANING THE CASE Only use tepid water and a mild detergent on a soft cloth. Do not use bleach or abrasives. Do not splash water directly onto the main unit. Avoid wetting the power connection port, doing so may cause an electric shock and can lead to the insulation deteriorating or unit to rust. -
Page 11: Troubleshooting
Auto and Timer Buttons Replace the filter and reset the appliance following flashing and unit bleeping the care and maintenance section. electriQ UK SUPPORT www.electriQ.co.uk/support Please, for your own convenience, check the troubleshooting guide before calling the service line. If the unit still fails to operate call: 0871 620 1057 or complete the online form Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.uk...