Extra Features; Care And Maintenance; Changing The Filter; Cleaning The Air Quality Sensor - ElectrIQ EAP500HC User Manual

EXTRA FEATURES:

TURN OFF THE
FRONT COLOUR
INDICATOR
IONISER
RESET THE
FILTER CHANGE
COUNTER

CARE AND MAINTENANCE

 Always shut off the unit and unplug from the mains before cleaning or performing
any maintenance.
 When the unit is not in use for long periods, it is advisable to remove the plug from
the power socket.
 Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may
cause irreversible damage to the unit.

CHANGING THE FILTER

Open the filter cover by pressing in the retaining tabs and pulling the front cover free.
Remove the old filter by simply pulling on the tabs to release them. Replace the filter
with a new/clean one before replacing the filter cover. Press and hold the AUTO +
TIMER buttons for 3 seconds to reset the filter timer once it has been replaced.

CLEANING THE AIR QUALITY SENSOR

Remove the cover from the sensor, and wipe the sensor with a damp cotton bud. It
should then be dried by wiping with a dry cotton bud before replacing the cover. For
optimal performance the sensor should be cleaned every two months.
Press and hold the Power and Speed buttons for 5 seconds
to turn the colour indicator on and off.
Press and hold the Power and Auto buttons for 5 seconds to
turn the ioniser on and off.
After changing the filter, Press and hold the Auto and Timer
buttons for 5 seconds to reset the filter change timer.
9