ElectrIQ EAP500-WIFI User Manual page 15

CONNECTING USING QUICK CONNECTION
Before initiating the connection, make sure the unit is in standby mode, with the WIFI
light flashing twice per second. If not follow the instructions for changing the
connection mode. Also ensure your phone is connected to the wifi network. (We
advise turning mobile data off during setup)
1. Open app and press "+" to
add device, or use the add
device button
4. Enter your wifi password and
press confirm.
2. Select the type of device
as "Air Purifier" within the
Home Appliance tab.
5. This will then transfer the
settings to the air purifier.
Wait for this to complete. If
this fails, retry. If still
unsuccessful please review
the troubleshooting section
for further help.
15
3. Ensure the wifi light on the air
purifier is flashing twice per
second，then press on the
orange button at the bottom
of the screen to confirm.