Table of Contents
Advertisement
AUTOMATION
Automation allows an automatic action to be set up for the device. This can be triggered by
the Time, air quality of the room, weather conditions, and a range of other influences.
1. Press on the Smart Scene
tab at the bottom of the
Home screen
6. Chose the function,
set the value for the
function, and then
press the back button
in the top right corner,
to return to the
previous screen.
2. Press on the Plus in the top
right corner to add a smart
scene.
4. Setup is very similar to the
scene setup on the previous page,
and includes an extra section for
specifying a trigger for the scene to
start.
Press the Pen next to "Please
Enter Scene Name" to input the
name for your Scene
Press the Red Plus next to "When
any condition is satisfied" to add
the trigger
Press the Red Plus next to
"Execute following actions" to add
the action required. Then select
the air purifier from the list of
devices.
7.
added, press the Save button in the top right
corner to finalise and save your new scene.
The automation is now set up, it can be turned on
and off using the toggle on the image shown on
step 2.
20
3. Select Automation to
5. Select the condition when the
automation should start. A
number of triggers can be
combined.
Once all the functions required have been
create a new Automation
Scene
Advertisement
Table of Contents
