Table of Contents
Advertisement
CONNECTING USING AP MODE (ALTERNATIVE METHOD)
Before initiating the connection, make sure the unit is in standby mode, with the wifi
light flashing once per second. If not follow the instructions for changing the wifi
connection mode. Also ensure your phone is connected to the wifi network. (We
advise turning mobile data off during setup)
1. Open app and press "+" to
add device, or use the add
device button
4. Ensure the wifi light on the
air purifier is slowly flashing
(once per three seconds),
then press on the orange
button at the bottom of the
screen to confirm
This will then transfer the settings to the air purifier.
Once the connection process has completed, go back to the network settings on your phone to ensure
your phone has reconnected to your wifi router.
2. Select the type of device
as "Air Purifier" within the
Home Appliance tab.
5. Enter your wifi password and
press confirm.
16
3.
Press on the AP mode
button in the top right of the
screen.
6. Go to network settings in your
phone and connect to the
"SmartLife xxx" connection.
There is no password to
enter. Then return back to the
app to complete setup.
Advertisement
Table of Contents
