Table of Contents
Advertisement
1.3. INSTALLATION PROCEDURE
IMPORTANT:
at least two people are required to lift the centrifuge from the palette and place it on
the bench.
Incorrect installation will affect safety and equipment performances.
The machine must be installed in a dust and non corrosive environment.
1. The Bench top must be rigid, sufficiently strong and levelled.
2. 300 mm of free space gap must be left on each side of the machine to ensure the proper
ventilation.
The centrifuge could move as a result of rotor imbalance, rotor disruption or drive
failure. To avoid dangerous consequences a safety envelope clearance around the unit
must be respected.
Service Manual 11290099
page 9 of 44
Advertisement
Table of Contents
