Table of Contents
Advertisement
HGA-6000 High Gain Antenna
Installation Manual
5.3 Built-In Test Log Analysis
1) This inspection should be performed whenever antenna malfunction is suspected.
2) Connect a PC to the RS-232 maintenance interface of the HGA-6000 and using the installation
software, select HGA-6000 maintenance option and follow the on-screen instructions.
3) Faulty units must be returned to Cobham for repair.
5.4 HGA-6000 Repair and Servicing
No repair actions will be able to be performed in the field. Faulty units must be returned to
Cobham for repair.
5.5 Removal Procedure
The removal procedure is the reverse of the installation procedure.
5.6 Warranty Seal
Warranty will be void if the "Warranty Seal" on any unit is removed or damaged.
5.7 Storage and Transportation
The units must be placed inside a padded box. The box must be stored in a dry area (<50%RH)
where the temperature remains within the range of –85°F to +185°F (–65°C and 85°C).
6. DISCONTINUED PRODUCTS
Cobham has ceased production of the Satcom Reference Unit (SRU) and Magnetic Sensor Unit
(MSU) in October 2009. The following part numbers are affected:
The references to the SRU and MSU in this document are retained as these components are present
in a number of operational systems.
Document: 862-A0059_IM issue 1.7
Table 6-1: Discontinued Products
Product
MSU-7250
SRU-7200
Part number
677-A0144
677-A0132
COMPANY CONFIDENTIAL
Page 25 of 37
Advertisement
Table of Contents
