Table of Contents
Advertisement
Sets the destination of the control input from the Footswitch. The options are: TEMPO, ACTIVE,
PRESET +, PRESET -, ENV TRIG
• FOOTSWITCH LEARN (Available when mode is set to FOOTSW.)
Sets the high and low limit of the control input level. When in this setting, connect the Footswitch
pedal to CONTROL IN A/B. Press YES and then press the Footswitch pedal a couple of times.
Press YES to save settings.
• REVERSE DIRECTION (Available when mode is set to FOOTSW.)
Reverses the direction of how the Footswitch pedal sends control input signals.
6.4.2 CONTROL IN B
The available settings are the same as for CONTROL IN A.
If you set CONTROL MODE to FOOTSW you can send a gate signal to the Control In
inputs to trigger the envelope generator. For more information, please see "7.4.1 ENV PAGE
1" on page 32.
6.5 AUDIO ROUTING
These settings are stored in the global settings and are not part of the preset.
6.5.1 ANALOG IN/OUT (IN OVERBRIDGE MODE)
Sets if the signal from the analog inputs (INPUT L/R) is routed to the FX blocks or not. It also sets if the
signal from the effect is routed to analog outputs (OUTPUT L/R and HEADPHONES) or not. These are
the settings if Overbridge mode is chosen in the USB CONFIG menu. For more information, please see
"6.8.1 USB CONFIG" on page 23.
ANALOG IN
Analog Input L/R
Analog Heat +FX supports 4 channels of audio. Audio from Analog Input is routed to the analog in-, and
outputs, and can optionally also be routed through the FX blocks. FX Send L/R is always routed to the
effect.
• AUTO In AUTO mode, Analog Heat +FX automatically detects if the Overbridge plugin is running
or not. With Overbridge running, the Analog In is not routed through the effect to the Analog Out.
(Same as OFF setting.) If Overbridge is not running, the signal from Analog In is routed through the
FX to the Analog Out. (Same as the IN+OUT setting.)
• IN+OUT Both Analog In and Analog Out are routed to the FX.
• IN Routes the signal from Analog In to the FX.
• OUT Routes the signal from the effect to Analog Out.
• OFF Neither Analog In nor Analog Out are routed to the FX.
OVERBRIDGE
PLUGIN
FX Send L/R
FX Return L/R
AH
IN
OVERBRIDGE
AUDIO INTERFACE
ANALOG OUT
OUT
Analog Output L/R
6. THE SETTINGS MENU
19
Advertisement
Table of Contents
