Sysex Send; Sysex Receive; System; Usb Config - Elektron Analog Heat +FX User Manual

Hide thumbs Also See for Analog Heat +FX:

Table of Contents

6.7.1 SYSEX SEND

Here settings and Presets can be sent to an external device via the MIDI OUT port or the USB port of the

Analog Heat +FX.

The column to the left selects what will be sent. Use the NAVIGATION knob to navigate in the column.

The SysEx data send alternatives located in the column to the right will change depending on the selec-

tion made in the left column. Press [YES] to access this column. Use the NAVIGATION knob to select

what will be sent. Press [YES] to initiate the SysEx send procedure.

SETTINGS will send all the Analog Heat +FX settings to the receiving device.

PRESET will send the selected Preset (or all Presets) to the receiving device.

Here settings and Presets can be received from an external device via the MIDI IN port or the USB port

of the Analog Heat +FX.

The column to the left selects what will be received. Use the NAVIGATION knob to navigate in the col-

umn. The SysEx data receive alternatives located in the column to the right will change depending on

the selection made in the left column. Press [YES] to access this column. Use the NAVIGATION knob to

select what will be received. Press [YES] to initiate the SysEx receive procedure. The Analog Heat +FX

starts listening to incoming data. Press [NO] to stop listening.

RECEIVE ANY listens to and receives any viable SysEx data (settings, Presets).

PRESET receives and stores a Preset to the selected slot.

• OVERBRIDGE

To use the Analog Heat +FX as an Overbridge device, select Overbridge mode. (ON, OFF)

• USB MIDI

Select this option If you wish to send MIDI over USB and disable the Overbridge integration func-

tionality. (ON, OFF)

6. THE SETTINGS MENU

Table of Contents