Table of Contents
Advertisement
6. THE SETTINGS MENU
6.3 OPTIONS
6.3.1 PAGE MENU
Will, when selected, display a popup parameter page menu when turning NAVIGATION on a parameter
page.
6.3.2 FX PAGE ORDER
Sets the order in which the FX parameter pages are displayed.
• FLOW follows the order of how the FX blocks are arranged on the FLOW page.
• ALPHA sorts the pages in alphabetical order .
• FIXED the order is fixed based on the order on the INIT preset.
6.3.3 ACTIVE AT START
Sets if Analog Heat +FX is in Active Mode or not when it is turned on.
6.3.4 KNOB MODE
Sets how the knobs on the panel affect the parameters. When you load a preset, the knobs positions
typically don't match their parameter values.
• JUMP immediately sets the value to the current knob position.
• In CATCH mode, turning the knob do not change the parameter value until the knob position match-
es the presets stored value.
You can see the current value of the parameter in the screens title bar while you turn the knob.
6.4 CONTROL IN
6.4.1 CONTROL IN A
• CONTROL MODE
Sets the port mode to adjust to different kinds of input signals. There are four modes: CV (Control
Voltage), EXPR (Expression Pedal), FOOTSW (Footswitch) and OFF.
• CV ZERO LEVEL (Available when mode is set to CV.)
Sets the Volt level at which CV modulation amount is zero. A control input level equal to this setting
corresponds to zero modulation. (-5.50 V–+5.50 V).
• CV MAX LEVEL (Available when mode is set to CV.)
Sets the Volt level at which CV modulation amount is max. A control input level equal to this setting
corresponds to full modulation. (-5.50 V–+5.50 V).
• EXPRESSION LEARN (Available when mode is set to EXPR.)
Sets the highest and lowest limit of the control input level.
CONTROL IN A/B
pedal to
min position. Press YES to save settings.
• REVERSE DIRECTION (Available when mode is set to EXPR.)
Reverses the direction of how the Expression pedal sends control input signals.
• FOOTSW DEST (Available when mode is set to FOOTSW.)
18
YES and then move the expression pedal first to max and then to
. Press
When in this setting, connect the Expression
Advertisement
Table of Contents
