The Settings Menu; Input Sensitivity; Modulation; Options - Elektron Analog Heat MKII User Manual

Stereo analog sound processor

Hide thumbs Also See for Analog Heat MKII:

Table of Contents

6. THE SETTINGS MENU

Here follows a description of all the parameters that are in the SETTINGS menu. You access the SETTINGS

menu by pressing the [SETTINGS] key. Scroll through the list of settings by using the PRESET/DATA knob.

Open a highlighted menu by pressing the PRESET/DATA knob or [YES]. To change the settings in the

menus, first press and then turn the PRESET/DATA knob.

Sets the audio input level to fit the audio level sent to the effect via the IN L/R inputs. It is important to set

this level correctly to get the best sound from your Analog Heat MKII. There are four different settings for

the input sensitivity: LOW, MID, HIGH & MAX. Low is the most silent, Max is the loudest. For more informa-

tion, please see "3.2 SETTING THE INPUT SENSITIVITY LEVEL" on page 10.

• LOW (Maximum input level 10,5 V, peak to peak)

• MID (Maximum input level 5,3 V, peak to peak)

• HIGH (Maximum input level 2,5 V, peak to peak)

• MAX (Maximum input level 1,2 V, peak to peak)

Here you can connect a number of modulation sources with their destinations and set the modulation

depth. For more information, please see "APPENDIX B: MODULATION SOURCES AND DESTINATIONS" on

page 35.

1. Turn the PRESET/DATA knob to scroll through the source list, and then select it by pressing PRESET/

DATA or [YES].

2. Turn the PRESET/DATA knob to scroll through the available destinations, and then select it by press-

ing PRESET/DATA or [YES].

3. Lastly, set the modulation depth amount by turning the PRESET/DATA knob. A negative value gives an

inverted modulation. You can also use the rightmost DATA ENTRY knob to set the modulation depth.

To reset the modulation amount to 0, press and hold [NO].

Table of Contents