Canon imageCLASS LBP325dn Service Manual page 117

Network Settings (Remote UI)
Select [Setup] > [Network] > [Remote UI Settings] from the setup menu to activate the Remote UI function. ([ON] is specified
at the time of shipment.) For details on the work procedure, refer to e-Manual [ Top page ] > [ Setting Menu List ] > [ Setup
Menu ] > [ Network ].
Setup
Network
Layout
Print Quality
Interface
Setting the Key Pair and Server Certificate Used When Communicating with TLS Encryption
To use SMS via TLS connection, it is required to specify a key pair and server certificate as the key to be used.
Since a key (default key) that can be used for encrypted TLS communication is installed as standard on this device, advance
setting of the key pair and server certificate is not required.
To use an encryption key other than the default key, refer to the e-Manual [Top page] > [Security] > [Implementing Robust
Security Features] > [Using TLS for Encrypted Communications] to set the key pair and server certificate required to perform
encrypted TLS communication.
NOTE:
As for SMS, by setting a Default Key, encrypted SSL communication is always executed regardless of the following setting: [ Setup ]
> [ Network ] > [ Remote UI Settings ] > [ TLS ]: ON/OFF.
Setting the Network Port
The default port of the HTTP server used for MEAP and MEAP applications to provide the servlet function is 8000, and the
HTTPS server's default port is 8443. In the case that these ports have already used by the customer who is to introduce this
application, the MEAP application cannot use the HTTP (or HTTPS) server(s).
NOTE:
A port number can be any integer from 0 to 65535. To avoid port numbers that are frequently used, do not use any integer from
0 to 1023.
Server
HTTP Server
HTTPS Server
NOTE:
• If Print Server is connected, do not specify port 8080.
If port 8080 is specified, it is not possible to access the remote UI of the device where the MEAP authentication application
is running. (Port 8080 is reserved to allow the PS Print Server Unit to redirect to the device.)
• As for port on HTTPS server, it only applies to the device that supports SSL function.
■ MEAP Application Management
Log in to SMS to manage MEAP applications.
Installing MEAP Applications
Install the MEAP application on this machine.
Network
Receive in Prallel
Wait Time at Startup
Remote UI Settings
Ethernet Driver
Setting value
1024 to 65535
1024 to 65535
107
3. Technical Explanation (System)
Remote UI Settings
Remote UI
RUI Access Sec. Set.
TLS
HTTP
Default value / Value after RAM clear
Remote UI
OFF
ON
8000
8443