Table of Contents
Advertisement
Super X13SAV-PS User's Manual
Spin Up Device
Set this feature to enable or disable the PCH to initialize the device. The options are
Disabled and Enabled.
SATA Device Type
Use this feature to specify if the SATA port should be connected to a Solid State Drive or
a Hard Disk Drive. The options are Hard Disk Drive and Solid State Drive.
VMD Setup Menu
VMD Configuration
Enable VMD Controller
Use this feature to enable or disable the VMD controller. The options are Disabled and
Enabled.
*If the feature above is set to Enabled, the following feature is available for configuration:
Enable VMD Global Mapping
Use this feature to enable or disable the Volume Management Device global mapping. The
options are Disabled and Enabled.
*If the feature above is set to Disabled, the following feature is available for configuration:
Map this Root Port under VMD
Use this feature to map or unmap the root port to VMD. The options are Disabled and Enabled.
Serial Port Console Redirection
COM1 Console Redirection
Select Enabled to enable console redirection support for a serial port. The options are Enabled
and Disabled.
*If the feature above is set to Enabled, the following features are available for
configuration:
COM1 Console Redirection Settings
Use this feature to specify how the host computer will exchange data with the client
computer, which is the remote computer.
88
Advertisement
Table of Contents
