Supermicro X13SAV-PS User Manual page 74

Super X13SAV-PS User's Manual
Configurable TDP Boot Mode
Use this feature to select the Configurable TDP Boot Mode. The options are Nominal,
Level 1, Level 2, and Deactivate.
ConfigurableTDP Levels
This feature displays the TDP level.
Power Limit 1
This feature displays the Power Limit 1 wattage.
Power Limit 2
This feature displays the Power Limit 2 wattage.
Custom Settings Nominal ConfigTDP Nominal
Power Limit 1
Use this feature to configure the value for Power Limit 1. The value is in milliwatts and the
step size is 125mW. Use the number keys on your keyboard to enter the value. Enter 0 to
use the manufacture default setting. If the value is 0, the BIOS will set PL2 as 1.25* TDP.
Power Limit 2
Use this feature to configure the value for Power Limit 2. The value is in milliwatts and the
step size is 125mW. Use the number keys on your keyboard to enter the value. Enter 0 to
use the manufacture default setting. If the value is 0, the BIOS will set PL2 as 1.25* TDP.
Power Limit 1 Time Window
Use this feature to determine how long the time window over which the TDP value is
maintained. The default setting is 0. The value may vary between 0 and 128.
Custom Settings Level1 ConfigTDP Level1
Power Limit 1
Use this feature to configure the value for Power Limit 1. The value is in milliwatts and the
step size is 125mW. Use the number keys on your keyboard to enter the value. Enter 0 to
use the manufacture default setting. If the value is 0, the BIOS will set PL2 as 1.25* TDP.
Power Limit 2
Use this feature to configure the value for Power Limit 2. The value is in milliwatts and the
step size is 125mW. Use the number keys on your keyboard to enter the value. Enter 0 to
use the manufacture default setting. If the value is 0, the BIOS will set PL2 as 1.25* TDP.
Power Limit 1 Time Window
Use this feature to determine how long the time window over which the TDP value is
maintained. The default setting is 0. The value may vary between 0 and 128.
74