Table of Contents
Advertisement
Custom Settings Level2 ConfigTDP Level2
Power Limit 1
Use this feature to configure the value for Power Limit 1. The value is in milliwatts and the
step size is 125mW. Use the number keys on your keyboard to enter the value. Enter 0 to
use the manufacture default setting. If the value is 0, the BIOS will set PL2 as 1.25* TDP.
Power Limit 2
Use this feature to configure the value for Power Limit 2. The value is in milliwatts and the
step size is 125mW. Use the number keys on your keyboard to enter the value. Enter 0 to
use the manufacture default setting. If the value is 0, the BIOS will set PL2 as 1.25* TDP.
Power Limit 1 Time Window
Use this feature to determine how long the time window over which the TDP value is
maintained. The default setting is 0. The value may vary between 0 and 128.
Chipset Configuration
Warning: Setting the wrong values in the following features may cause the system to malfunc-
tion.
System Agent (SA) Configuration
The following information will display:
•
VT-d: Supported
Memory Configuration
Memory Configuration
•
Memory RC Version
•
Memory Frequency
•
Memory Timings (tCL-tRCD-tRP-tRAS)
•
DIMMA1
•
DIMMB1
Maximum Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules.
The options are Auto, 1067, 1333, 1400, 1600, 1800, 1867, 2000, 2133, 2200, 2400,
2600, 2667, 2800, 2933, 3000, 3200, 3467, 3600, 3733, 4000, 4200, 4267, 4400, 4600,
and 4800.
75
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
