Supermicro X13SAV-PS User Manual page 86

Super X13SAV-PS User's Manual
PCIe/PCI/PnP Configuration

Option ROM execution
Video
Use this feature to select the execution of the video OpROM. The options are Do not launch
and EFI.
PCI PERR/SERR Support
Use this feature to enable or disable the runtime event for PCI errors. The options are
Disabled and Enabled.
Above 4GB MMIO BIOS Assignment (Available if the system supports 64-bit PCI
decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Disabled and Enabled.
Re-Size BAR Support
When this feature is enabled, resizable Base Address Register (BAR) will be available for
PCIe devices that support this feature. The options are Disabled and Enabled.
SR-IOV Support
Use this feature to enable or disable Single Root IO Virtualization Support. The options are
Disabled and Enabled.
BME DMA Mitigation
Enable this feature to help block DMA attacks. The options are Disabled and Enabled.
NVMe Firmware Source
The feature determines which type of NVMe firmware should be used in your system. The
options are Vendor Defined Firmware and AMI Native Support.
Consistent Device Name Support
This feature controls the device naming for network devices and slots. The options are
Disabled and Enabled.
PCIe/PCI/PnP Configuration
SLOT7 PCIe 4.0 x4
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled and EFI.
PCIe M.2-M OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled and EFI.
86