Supermicro X13SAV-PS User Manual page 82

Super X13SAV-PS User's Manual
Network Configuration

Network Stack
Select Enabled to enable Preboot Execution Environment (PXE) or Unified Extensible
Firmware Interface (UEFI) for network stack support. The options are Disabled and Enabled.
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
IPv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
IPv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media Detect Count
Use this option to specify the number of times media will be checked. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
MAC:XXXXXXXXXXXX-IPv4 Network Configuration
MAC:XXXXXXXXXXXX-IPv4 Network Configuration
Configured
Use this feature to specify whether the network address is configured successfully or not.
The options are Disabled and Enabled.
Save Changes And Exit
Use this feature to save changes and exit.
82