Super X13SAV-PS User's Manual
SIM Detect Option
Pins 2 and 4 on the JSIM1_OPT jumper are for SIM card detection. Since each SIM card
vendor sets a different condition for detection, check with the vendor for the correct detection
type and set the JSIM1_OPT jumper before installing the SIM card.
5G/LTE USB/PCIe Interface Option
Pins 1 and 3 on the JSIM1_OPT jumper are for 5G/LTE USB/PCIe module detection. Check
with the vendor for the correct detection type and set the JSIM1_OPT jumper before installing
the module.
M.2 B-Key Storage LED
Pins 5 and 6 on the JSIM1_OPT jumper are for enabling or disabling M.2 B-Key storage
module LED signal to the front panel HDD LED. Disconnect pins 5 and 6 to disable the LED
signal.
MH2
JSPKR1
LAN2
JMD1
JGP1
JMD1_SRW1
JMD2_SRW1
JMD3_SRW1
1
JMD3
I-SATA0
JMD2
MH4
JL1
JPT1 JPME2
JD1
SIM Detect Option / 5G/LTE USB/PCIe Interface Option
Jumper Settings (JSIM1_OPT)
Jumper Setting
Definition
Pins 2-4
SIM Detect Low Active (Default)
Pins 2-4 Open
SIM Detect High Active
Pins 1-3
USB (Default)
Pins 1-3 Open
PCIe Low Active
Pins 5-6
M.2 B-Key Storage LED Enabled (Default)
Pins 5-6 Open
M.2 B-Key Store LED Disabled
PCB EDGE
PCB EDGE
PCB EDGE
PCB EDGE
PCB EDGE
USB0
USB6/7
USB8/9
USB5 (3.2)
LAN1
CPU
X13SAV-PS
REV:1.01
DESIGNED IN USA
DIMMA1
DIMMB1
1. SIM Detect Option
PCB EDGE
PCB EDGE
HDMI2.0B
DP
MH1
FAN1
FAN2
EDP1
JPWR1
JPV1
MH3
54