Supermicro X13SAV-PS User Manual page 70

Super X13SAV-PS User's Manual
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay-Off for the system
power to remain off after a power loss. Select Power-On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Power-On, Stay-Off and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select 4
Seconds Override for the user to power off the system after pressing and holding the power
button for four seconds or longer. Select Instant Off to instantly power off the system as soon
as the user presses the power button. The options are Instant Off and 4 Seconds Override.
DeepSx Power Policies
Use this item to configure the Advanced Configuration and Power Interface (ACPI) settings for
the system. Enable S3 to use Standby Mode (Suspend-to-RAM) and maintain power supply
to the system RAM when the system is in the sleep mode. Enable S4 to use Hibernation
mode (Suspend to Disk) so that all data stored in of the main memory can be saved in a
non-volatile memory area such as in a hard drive and then power down the system. Enable
S5 to power off the whole system except the power supply unit (PSU) and keep the power
button alive so that you can wake up the system by using an USB keyboard or mouse. The
options are Disabled, Enabled in S4-S5, and Enabled in S5.
CPU Configuration

The following CPU information will display:
•
CPU Signature
•
Microcode Patch
•
Max CPU Speed
•
Min CPU Speed
•
CPU Speed
•
Number of Performance-cores
•
Number of Efficient-cores
•
Hyper Threading Technology
•
VMX
•
SMX/TXT
70