Supermicro X13SAV-PS User Manual page 78

Super X13SAV-PS User's Manual
DMI/OPI Configuration

DMI Gen3 ASPM
Use this feature to set the Active State Power Management (ASPM) state on the System
Agent (SA) side of the DMI Link. The options are Disabled, Auto, ASPM L0s, ASPM L1,
and ASPM L0sL1.
PEG Configuration

PEG Port Configuration
SLOT7 PCIe 4.0 x4
Enable Root Port
Use this feature to enable or disable the PCI Express root port. The options are Disabled
and Enabled.
Max Link Speed
Use this feature to select PCIe support for the device installed in slot 1. The options are
Auto, Gen1, Gen2, Gen3, and Gen4.
M.2-M PCIe 4.0 x4
Enable Root Port
Use this feature to enable or disable the PCI Express root port. The options are Disabled
and Enabled.
Max Link Speed
Use this feature to select PCIe support for the device installed in the M.2 slot. The op-
tions are Auto, Gen1, Gen2, Gen3, Gen4, and Gen5.
GT - Power Management Control

RC6 (Render Standby)
Use this feature to enable render standby support. The options are Disabled and En-
abled.
78