Supermicro X13SAV-PS User Manual page 73

Enhanced C-states
Use this feature to enable the enhanced C-State of the CPU. The options are Disabled and
Enabled.
C-State Auto Demotion
Use this feature to prevent unnecessary excursions into the C-states to improve latency. The
options are Disabled and C1.
C-State Un-Demotion
This feature allows you to enable or disable the un-demotion of C-State. The options are
Disabled and C1.
Package C-State Demotion
Use this feature to enable or disable the Package C-State demotion. The options are Disabled
and Enabled.
Package C-State Un-Demotion
Use this feature to enable or disable the Package C-State un-demotion. The options are
Disabled and Enabled.
C-State Pre-Wake
This feature allows you to enable or disable the C-State Pre-Wake. The options are Disabled
and Enabled.
Package C-State Limit
Use this feature to set the Package C-State limit. The options are C0/C1, C2, C3, C6, C7,
C7s, C8, C9, C10, Cpu Default, and Auto.
MonitorMWait
Select Enabled to enable the Monitor/Mwait instructions. The Monitor instructions monitors
a region of memory for writes, and MWait instructions instruct the CPU to stop until the
monitored region begins to write. The options are Disabled and Enabled.
Config TDPConfiguration
Config TDP Configurations
Enable Configurable TDP
Use this feature to select the Configurable Processor Base Power. The options are Applies
to non-cTDP and Applies to cTDP.
73
Chapter 4: UEFI BIOS