Advertisement
Setting an Universal Comm. Kit address (MAIN/RMC/MCU port)
1. Check whether power is supplied or not.
‐ When the Universal Comm. Kit is not plugged in, there should be additional power supply.
2. The reception part of a remote controller is built in the Universal Comm. Kit PBA.
3. Each address of Universal Comm. Kit (MAIN/RMC) should be set according to installation conditions.
4. Assign each Universal Comm. Kit address (MAIN/RMC) with a remote controller.
‐ The initial setting status of universal comm. kit ADDRESS(MAIN/RMC/MCU port) is "0A0000-100000-
200000-300000"
• Also set the MCU and universal comm. kit address by using Add-on > Change address on
S-NET Pro 2. (For more information, see the S-NET Pro 2 Help.)
CAUTION
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option
SEG1
Explanation
PAGE
Remote
Controller
Display
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication
and Details
0
Option
SEG7
Explanation
PAGE
Remote
Controller
Display
Indication Details
Indication
and Details
1
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 33
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 33
SEG2
SEG3
MODE
Setting Main address
No Main
0
address
Main
A
address
1
setting
mode
SEG8
SEG9
Setting RMC address
-
Indication Details
No RMC
0
address
RMC
address
1
setting
mode
SEG4
SEG5
100-digit of indoor
10-digit of indoor
unit address
unit
0~9
100-digit
0~9
10-digit
SEG10
SEG11
Group channel
-
Indication Details Indication Details
RMC1
0~F
SEG6
The unit digit of an
indoor unit
A unit
0~9
digit
SEG12
Group address
RMC2
0~F
33
2023-01-13 오전 11:35:16
2023-01-13 오전 11:35:16
Advertisement
