Advertisement
Example of IN/OUT sensor installation 2
1. Chcek the sensor and sensor holder you will attach.
Type
NOTE
IN sensor (Red)
OUT sensor
(Blue)
2. Attach the sensor closely to the pipe.
Attaching a sensor
• Attach the sensor at the place where temperature
NOTE
detection is easily available. (Refer to p.20)
• Attach the sensor as closely as possible on the
surface of the pipe.
• Do not use a sensor holder.
3. After attaching the sensor on the pipe, cover it with
aluminum tape.
4. Cover the sensor with rubber tape.
5. Fix the sensor with cable ties.
6. Attach the insulator around the attached sensor.
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 29
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 29
Diameter of a
Diameter of a sensor
sensor (in(mm))
holder (in(mm))
Φ0.24" (Φ6)
Φ0.27" (Φ6.8)
Φ0.28" (Φ7)
Φ0.31" (Φ7.8)
IN/OUT
sensor
Insulator
Aluminum tape
Rubber tape
Pipe
Sensor
Aluminum tape
Rubber
tape
IN/OUT sensor
Cable tie
Insulator
Cable tie
IN/OUT
sensor
29
2023-01-13 오전 11:35:13
2023-01-13 오전 11:35:13
Advertisement
