Advertisement
Setting an address and installation option of Universal Comm. Kit
13. Setting SEG16, SEG17 option
Press Low Fan button( ) to enter SEG16 value.
Press High Fan button( ) to enter SEG17 value.
Each time you press the button, → → ... → will be selected in rotation.
14. Setting Dry mode
Press
button to be change to Dry mode in the OFF status.
15. Setting SEG18, SEG20 option
Press Low Fan button( ) to enter SEG18 value.
Press High Fan button( ) to enter SEG20 value.
Each time you press the button, → → ... → will be selected in rotation.
16. Setting Fan mode
Press
button to be change to Fan mode in the OFF status.
17. Setting SEG21, SEG22 option
Press Low Fan button( ) to enter SEG21 value.
Press High Fan button( ) to enter SEG22 value.
Each time you press the button, → → ... → will be selected in rotation.
18. Setting Heat mode
Press
button to be change to HEAT mode in the OFF status.
19. Setting SEG23, SEG24 mode
Press Low Fan button( ) to enter SEG23 value.
Press High Fan button( ) to enter SEG24 value.
Each time you press the button, → → ... → will be selected in rotation.
Step 3. Checking the option you have set
After setting option, press
→
→
Step 4. Entering an option
Press the operation button
For the correct option setting, You must press the on/off button two time shortly.
Step 5. Checking operation
1) Press the power reset button or the reset button of an outdoor unit to reset the settings.
2) Take the batteries out of the remote controller and insert them again and then press the
32
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 32
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 32
Option setting
button to check whether the option code you have entered is correct or not.
→
→
→
→
with the direction of a remote controller to set.
Status
SEG16
SEG18
SEG21
SEG23
→
→
→
SEG17
SEG20
SEG22
SEG24
button.
2023-01-13 오전 11:35:15
2023-01-13 오전 11:35:15
Advertisement
