Multitech MultiConnect Dragonfly MTQ-L1G2D Device Manual page 37

b. Select Install the hardware that I manually select from a list, then click Next.
c. Select Modems, then click Next.
d. Check Don't detect my modem; I will select it from a list, then click Next.
e. Select Standard Modem Types, then select Standard 33600 bps Modem on the right.
Important:
may cause your device to work incorrectly or fail.
f. Select your COM port, then click Next.
g. Click Finish.
h. Go to Device Manager > Modems and confirm that the device is added.
6. To verify that the device is set up correctly, query the device:
a. Go to Device Manager > Modems, right-click Standard 33600 bps Modem, and select Properties.
b. On the Diagnostics tab, click Query Modem.
Note:
port.
If the device is ready, diagnostic information from the device appears in the box above.
To connect the device to your carrier's network, refer to
®
MultiConnect Dragonfly
Make sure that you select only Standard 33600 bps Modem. Selecting another model
The device cannot be queried if the Connection Manager is running and using the device's
TM
MTQ-L1G2D Device Guide
Connecting a Device.
USING CONNECTION MANAGER
37