Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Multitech Manuals
  4. Computer Hardware
  5. MultiModemISI Hybrid Series
  6. User manual

Multitech MultiModemISI Hybrid Series User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
MultiModemISI Hybrid Series
Models ISIHP- 2S/2U/4S/4U/4SD
User Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the MultiModemISI Hybrid Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Multitech MultiModemISI Hybrid Series

Summary of Contents for Multitech MultiModemISI Hybrid Series

  • Page 1 All manuals and user guides at all-guides.com MultiModemISI Hybrid Series Models ISIHP- 2S/2U/4S/4U/4SD User Guide...
  • Page 2 UNIX is a registered trademark of X/Open Company, Ltd. Windows 95 and Windows NT are registered trademarks of Microsoft. Multi-Tech Systems, Inc. 2205 Woodale Drive Mounds View, Minnesota 55112 (612) 785-3500 or (800) 328-9717 Fax (612) 785-9874 Tech Support (800) 972-2439 Internet Address: http://www.multitech.com...

  • Page 3: Table Of Contents

    All manuals and user guides at all-guides.com Contents Introduction Welcome and Product Description ............ 4 Peripiheral Component Interconnect (PCI) ........8 Communication Protocols ..............9 Hardware Installation Software Installation ..............19...

  • Page 4: Introduction

    All manuals and user guides at all-guides.com Introduction Warranty & Service AT Commands and S-Registers Troubleshooting Regulatory Info ................148 Index .................... 154 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 5 All manuals and user guides at all-guides.com Introduction MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 6 Figure 1-1: Modems and Terminal Adapters of ISIHP-2S/2U Modem RJ-45 Jack Modem Modem RJ-45 Jack Modem Modem RJ-45 Jack Modem Modem RJ-45 Jack Modem Figure 1-2: Modems and Terminal Adapters of ISIHP-4S/4U (for ISIHP-4SD, no modems are present) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 7 All manuals and user guides at all-guides.com Introduction MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...

  • Page 8: Peripiheral Component Interconnect (Pci)

    All manuals and user guides at all-guides.com Introduction Peripiheral Component Interconnect (PCI) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...

  • Page 9: Communication Protocols

    All manuals and user guides at all-guides.com Introduction Communication Protocols for ISIHP Ports MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 10 All manuals and user guides at all-guides.com Introduction MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...

  • Page 11: Hardware Installation

    All manuals and user guides at all-guides.com Hardware Installation Hardware Installation MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 12 All manuals and user guides at all-guides.com Hardware Installation Introduction Computer Requirements Shipping Contents Safety Warnings MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 13 All manuals and user guides at all-guides.com Hardware Installation Hardware Installation Procedure MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 14 ( Side View ) V.110 Daughter Card ISIHP-2S International V.110 Modem Card Daughter Card ISIHP-2U U.S. Domestic V.110 Daughter Card Modem Card ISIHP-4S/4U Figure 1-3: ISIHP Cards; Side View (on ISIHP-4SD, right daughter card is not present) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 15 ISDN phone cord should be connected between the ISDN network connection cable and the NT1 device. If the S/T-interface model (ISIHP-2S, -4S, or 4SD) is used, then the S/T-interface must be connected to the S-interface on the NT1 device. MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 16 All manuals and user guides at all-guides.com Hardware Installation LED Indicators ISIHP-4U LEDs (one LED per BRI) LINE 1 Line 1 Line 2 ISIHP-4S/4SD LEDs (one LED per BRI) Line 3 Line 4 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 17 All manuals and user guides at all-guides.com Hardware Installation ISIHP-2S LED Indicators B1 LED Indicator LINE 1 LINE 2 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 18 All manuals and user guides at all-guides.com Hardware Installation ISIHP-2U LED Indicators P LED Indicator LINE 1 D LED Indicator LINE 2 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...

  • Page 19: Software Installation

    All manuals and user guides at all-guides.com Software/Driver Installation Software Installation MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 20 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) Installing the ISIHP in Windows NT 3.51/4.0 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 21 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) MultiModem ISI Driver for Windows NT MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 22 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 23 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 24 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) Installing TAs & Modems to COM Ports in Windows NT To install terminal adapters: MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 25 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 26 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) Introduction modems MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 27 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) To install modems: {does not apply to -4SD} MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 28 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) modems MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 29 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 30 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 31 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 32 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) icon I/O Addresses and IRQ Codes MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 33 All manuals and user guides at all-guides.com Software/Driver Installation (Windows NT) for Windows NT for Windows 95 Removing ISIHP Card and Driver in Windows NT 3.51/4.0 Note: To complete an uninstall, reboot your system. MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 34 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 95/98) Installing the ISIHP in Windows 95 and Windows 98 Windows 95 Installation MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 35 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 95) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 36 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 95) To Remove the ISIHP Card &Drivers in Windows 95 Note: To complete an uninstall, reboot your system. Windows 98 Installation MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 37 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 98) MultiModem ISI Driver for Windows 95/98 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 38 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 98) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 39 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 98) To Remove the ISIHP Card and Drivers in Windows 98 To remove the ISIHP card: To remove the drivers: MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 40 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 98) Installing TAs & Modems to COM Ports in Windows 95 /98 To install terminal adapters: MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 41 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 98) MultiModem ISI Driver for Windows 95 & Netware AIO MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 42 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 98) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 43 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 98) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 44 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 98) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 45 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 98) To install modems (Windows 95/98): {not applicable to -4SD} MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 46 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 95/98) MultiModem ISI Driver for Windows NT modems MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 47 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 95/98) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 48 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 95/98) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 49 All manuals and user guides at all-guides.com Software/Driver Installation (Windows 95/98) Removing the Driver (Windows 95 only) Configuring the Terminal Adapter Introduction ISDN TA Configuration Utility ConfigMenu AT Commands North American Users Network Switch Type ____________________ MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 50 AT commands: AT!N1= and AT*!N1= Note: SPIDs only apply for North American switch types. International Users Optional Settings Data TEI _____________________________ Auto TE Disable AT command: !D3= Voice TEI _____________________________ Auto TEI Disable AT command: *!D3= MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 51 Persistent DTR Dialing __________________ AT command: $D Auto Answer Data Calls _________ Rings to Answer _________ AT command: Dialing Method ________________________ Enbloc Overlap AT command: %A97= Data Protocol _________________________ language AT command: !Z V.120 Protocol PPP Protocol V.110 Protocol MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 52 All manuals and user guides at all-guides.com Software/Driver Installation X.75 Protocol Stored Numbers ________________________ AT command: &Z= Dialing Stored Numbers _________________ &Zn=x AT command: e.g., DS3 ISDN TA Configuration Utility MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 53 All manuals and user guides at all-guides.com Software/Driver Installation MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 54 All manuals and user guides at all-guides.com Software/Driver Installation MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 55 All manuals and user guides at all-guides.com Software/Driver Installation MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 56 All manuals and user guides at all-guides.com Software/Driver Installation MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 57 All manuals and user guides at all-guides.com Software/Driver Installation MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 58 All manuals and user guides at all-guides.com Software/Driver Installation ConfigMenu Configuration Utility MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 59 All manuals and user guides at all-guides.com Software/Driver Installation Enter ConfigMenu Menus Network Configuration Menu Save Network Configuration Call Control Configuration Menu Data Protocol Menu Stored Numbers Menu Port Control Configuration Menu Help Menu Terminal Adapter AT Commands MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 60 All manuals and user guides at all-guides.com Software/Driver Installation &W AT Commands and S- Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 61 All manuals and user guides at all-guides.com Software/Driver Installation NetWare Connect (Novell) Driver Installation {2S/2U models only} AIOISIX.NLM Configuring Ports for NetWare Connect Removing the Driver (Novell) Autoexec.ncf MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 62 Floppy Disk Drive 0 Examining media. Please wait … Full Installation ENTER Extracting Files... Executing Multi-Tech Serial Card Driver Init Script... ENTER install ENTER Do you wish to continue ( y / n / q ):? ENTER MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 63 Multi_View is a utility which will allow you to have multiple sessions on terminals that have multiple pages of physical memory. order for this utility to work with MultiTech’s serial cards, pseudo devices have to be created in your /dev directory. These devices are system-wide resources.
  • Page 64 The default prefix for the tty ports is ttyl. The default prefix for the printer is prnl. Is this acceptable? (y/n/q). Details for use of non-default port/printer values deleted basename prefix board number port letter basename: board number: port letter: MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 65 The printer prefix is prnl. Number of Multi_View pseudo devices [user-specified number]. Press <Enter> ENTER to continue Installation ENTER complete ENTER Host ENTER Exit ENTER shutdown -g0-y ENTER init 6 Activating Ports in SCO Open Server 5 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 66 For example, you cannot enable ttyl1a and then enable ttyl1A. To change the status of a port, disable the current status (disable ttyl1a) and then enable it for the desired status (enable ttyl1A). MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 67 All manuals and user guides at all-guides.com Software/Driver Installation Removing the Driver (SCO Open Server 5) Note: Remove the driver before permanently removing the ISI card from the computer. MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 68 All manuals and user guides at all-guides.com Software/Driver Installation Linux Driver Installation To install the Linux driver: make ISICOMStart MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 69 All manuals and user guides at all-guides.com Software/Driver Installation Note: A base I/O address of 0, e.g., ISIBaseX=oxo, or omission of these parameters for any card X, disables that particular card. Miscellaneous: MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 70 All manuals and user guides at all-guides.com Software/Driver Installation MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 71 All manuals and user guides at all-guides.com Warranty and Service Information Warranty & Service Information Upgrades and Support Service MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 72 All manuals and user guides at all-guides.com Warranty and Service Information Limited Warranty MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 73 All manuals and user guides at all-guides.com AT Commands and S-Registers AT Commands S-Registers Contents MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 74 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Modem AT Commands AT commands attention characters, AT command string Modes of Operation command mode online mode wait-for-carrier escape MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 75 Modem AT Commands & S-Registers Command Structure & Note: Each character in a command counts toward the 40 character command line maximum. Example: Q1 is a single command, but it counts as two characters in the command line. Command Editing MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 76 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Topic Command Description MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 77 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 78 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 79 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Dialing Commands Dial Modifier Commands MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 80 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Phone Number Memory Commands ENTER ENTER Configuration Storage and Recall Commands MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 81 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 82 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Modem Response (Result Code) Commands result codes verbose terse MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 83 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers smart dialing blind dialing MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 84 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Note: These commands are the same as several of the \N commands, described later in this chapter. Online Connection Commands MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 85 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers handshake MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 86 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers polite garbage RS-232 Interface Commands MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 87 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers high drops MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 88 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Error Correction and Data Compression Commands MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 89 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Immediate Action Commands MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 90 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Flow Control Commands high MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 91 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers high MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 92 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Escape Sequences MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 93 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers +++) MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 94 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Modem S-Registers S-registers what register read MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 95 Note: If you change the S3 value, you must make corresponding changes in your data communications software. Note: If you change the S5 value, you must make corresponding changes in your data communications software. MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 96 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 97 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 98 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 99 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Used for testing and debugging only. MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 100 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers Reading and Assigning S-Register Values Examples of Assigning Values Examples of Reading Values 005 004 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 101 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers AT Commands that Affect S-Registers Modem Result Codes Terse Verbose Definition MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 102 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 103 All manuals and user guides at all-guides.com Modem AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 104 All manuals and user guides at all-guides.com AT Commands and S-Registers Terminal Adapter AT Commands Entering AT Commands AT <command string> <cr> MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 105 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers escape sequence +++AT<cr> <break >AT<cr> AT commands Topic Command Description MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 106 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 107 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 108 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers Command Implementation RETURN +++AT<cr> break>AT<cr> Switch Configuration Commands %A97=n %A97=0 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 109 !C0=1 !C0=2 !C0=5 !C6=n Note: For DMS-100 switches, any ASCII character except the underline (_) character is valid. For NI-1 and AT&T switches, only the digits 0–9 are valid. (Not needed for NET3 switch type.) *!C6=n MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 110 Note: For DMS-100 switches, any ASCII character except the underline (_) character is valid. For NI-1 and AT&T switches, only the digits 0–9 are valid. (Not needed for NET3 switch type. !D3=n !D3=240 !D3= !D3=0–63 !D3=240 !D3=241 *!D3=n *!D3=240 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 111 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers *!D3=0-63 *!D3=240 *!D3=241 >Dn >D0 >D1 >D2 >D3 >D5 >D6 >D98 >D99 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 112 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers !N1=n MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 113 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers *!N1=n MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 114 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers !Z=n !Z=9 !Z=5 !Z=6 !Z=9 !Z=12 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 115 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers Serial Port Configuration Commands ATL5 ATL6 Sr=n MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 116 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers OK, CONNECT, RING, NO CARRIER, ERROR 0–4 BUSY 0–5, 10–14, 17–19, 28, CARRIER 0– 5, 7, 10–14, 17–19, 28, MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 117 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers &W &W0 &W1 &F0 &W &Cn &C1 &C0 &C1 &C2 &Dn &D1 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 118 TA is able to accept calls while DTR is low. If this configuration setting is not made, the TA rejects incoming calls until DTR is high while the calls comes in. &En &E4, &E6, &E13 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 119 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers flow control pacing &E3 &E4 &E4 &E5 &E6 &E7 &E12 &E13 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 120 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers &Fn &F0 &Fn, &W &F0 &F1 &F2 &F3 &F4 &Rn &R1 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 121 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers &R0 &R1 &R2 &Sn &S1 &S0 &S1 &S2 &Vn MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 122 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers &Wn &W1 &W0 &F &W1 &Zn=x &Z NTER ETURN 6313551 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 123 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers ATDSn $MBn %E1 %E5 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 124 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers %E3 %E5 @P3=n @P3=4 @P3=0 @P3=1 @P3=2 @P3=3 @P3=4 @P4=n @P4=8 @P4=7 @P4=8 @P6=n @P6=1 @P6=1 @P6=2 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 125 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers Data Call Commands 1.00 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 126 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers @CONFIG Terminal Adapter S-Registers Sr=n S7=45 ATS7? S-Register Summary S-Register Function MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 127 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers S0=0 S0=1 &D MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 128 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 129 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers NTER MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 130 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 131 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 132 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 133 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 134 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 135 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers Terminal Adapter Result Codes result codes, terse verbose CONNECT Terse Verbose MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 136 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers Using AT Commands to Operate the Terminal Adapter Modes of Operation Offline Command Mode MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 137 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers Data Mode Online Command Mode Making a Call Dialing ATD16127853500 <cr> ATD 1-612-785-3500 <cr> ATD 1 (612) 785-3500 <cr> MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 138 Terminal Adapter AT Commands & S-Registers Canceling a Call Storing a Telephone Number &Zn=x Dialing a Stored Telephone Number DS=n Displaying a Stored Number &Zn? Answering a Call RING Answering Manually RING <cr> Answering Automatically S0=4 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 139 TA can accept calls while DTR is low. If this configuration setting is not made, the TA rejects incoming calls until DTR is high while the calls comes in. Answering Using Call Steering Hanging Up +++AT<cr> ATH<cr> +++ATH<cr> MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 140 All manuals and user guides at all-guides.com Terminal Adapter AT Commands & S-Registers MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 141 All manuals and user guides at all-guides.com Troubleshooting Troubleshooting MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 142 All manuals and user guides at all-guides.com Troubleshooting The terminal adapter does not respond to commands MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 143 All manuals and user guides at all-guides.com Troubleshooting MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 144 All manuals and user guides at all-guides.com Troubleshooting The terminal adapter dials but cannot make a connection MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 145 The solution is to not check the box or to simply add the bundling dial modifier to the phone number at the time of connection. The terminal adapter disconnects while online MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 146 AT&D0<cr>. Configured this way, the TA accepts calls while DTR is low. Otherwise the TA rejects incoming calls until DTR is high while the calls come in. File transfer appears slower than it should Data is being lost There are garbage characters on the monitor MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 147 All manuals and user guides at all-guides.com Regulatory Information Regulatory Information MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 148 All manuals and user guides at all-guides.com Regulatory Information Regulatory Agency Information FCC Part 68 Telecom MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 149 All manuals and user guides at all-guides.com Regulatory Information Federal Communications Commission Statement MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 150 All manuals and user guides at all-guides.com Regulatory Information Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Industry Canada FCC Fax Warning fax branding MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 151 All manuals and user guides at all-guides.com Regulatory Information Canadian Limitations Notice Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electri- cian, as appropriate. MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 152 All manuals and user guides at all-guides.com Regulatory Information EMC, Safety, and Terminal Directive Compliance MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 153 All manuals and user guides at all-guides.com Regulatory Information MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 154 12 installation 13 hardware installation package contents 12 introduction 12 port assignments 7 protocols 9 I/O address 32 installation Remote Access Server (RAS) 4 activating ports removing in SCO Open Server 5 65 software/driver MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD...
  • Page 155 All manuals and user guides at all-guides.com NetWare Connect (Novell) 61 software/drivers in SCO Open Server 5 67 removing driver in Windows NT 33 removing software/driver in Windows 95 36 in Windows 98 39 in Windows NT 33 S/T interface 15 safety warnings 12 SCO Open Server 5 62 service 71...

This manual is also suitable for:

Isihp-2sIsihp-2uIsihp-4sIsihp-4uIsihp-4sd