Table of Contents
Advertisement
Alarm Settings (ALARM)
Setting the alarm signal output
Set the alarm output options for the alarm detection in the
surveillance area (AREA 1 - 4).
After returning to the MOTION ZONE screen, perform the following
procedure.
MOTION ZONE
AREA 1
AREA 2
AREA 3
AREA 4
SENSITIVITY
ALARM OUT
LINE OUT
DURATION
PRESET
MENU
1
Use the joystick lever (xy) to select [ALARM OUT]
and use the lever (vw) to select an alarm output
terminal.
Available settings:
• OFF: Does not output the alarm signal.
• 1:
Uses the output terminal 1.
• 2:
Uses the output terminal 2.
2
Use the joystick lever (xy) to select [LINE OUT] and
use the lever (vw) to determine whether the alarm
signal is output to the connection line with the
system controller.
Available settings:
• OFF: Does not output the alarm signal to the connection
line.
• ON: Outputs the alarm signal to the connection line.
3
Use the joystick lever (xy) to select [DURATION]
and use the lever (vw) to select the interval after
which the next alarm becomes in effect.
Available settings: 5S, 10S, 15S, 20S, 30S, 45S, 1M, 2M,
3M, 4M, 5M (S: Second, M: Minute)
☞
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
43
OFF
OFF
OFF
OFF
SET
y
OFF
OFF
5S
OFF
BACK
Setting the alarm information display
E
(ALARM DISPLAY)
When the alarm is detected, the preset number and the camera ID on
the screen flash notifying that the alarm is detected.
Monitor display legend
001
CAM1
ALARM
ALARM IN
ALARM OUT
ALARM DISABLE
TIME
MOTION
ALARM DISPLAY
TIME
PRESET
MENU
1
Use the joystick lever (xy) to select [ALARM
DISPLAY] and use the lever (vw) to select
"ON/OFF".
Available settings:
• OFF: The alarm information does not flash.
• ON: The alarm information flashes.
([TIME] appears under [ALARM DISPLAY].)
2
When "ON" is selected, use the joystick lever (xy)
to select [TIME], and use the lever (vw) to select the
duration for which the alarm information is
flashing.
Available settings: 5S, 10S, 15S, 20S, 30S, 45S, 1M, 2M,
3M, 4M, 5M (S: Second, M: Minute)
☞
After completing setting, use the lever to move the cursor to
[MENU] and select "BACK" or "END".
FLOOR
1
y
1
y
ON
1M
PRESET
ON
5S
OFF
BACK
Hide quick links:
Advertisement
Table of Contents
